Use VM machine from Fusion 1.1.2 in VMWare 5
Hello, I have been using VMWare Fusion 1.1.2 for some years now and have only just upgraded to Snow Leopard. My VM machine is no longer working and I'm having to upgrade. If I upgrade to VMware 5, will...
View ArticleRe: vSphere Web Client, hosts gone
I am also having the same issue. Have you found a solution yet. Thank You
View ArticleRe: multi displays setup
I have just installed HD7870, and changed the BIOS to make initial display to this PCIE GPU. However, ESXi booted until "cnic_register loaded successfully" and just hang there. Is this due to not...
View ArticleRe: Network question for new Vsphere 5.1 Datacenter
"What about the service console? Can it be on the same vswitch as vmotion+management?" For vsphere 5 and esxi no service console and you can put mangement + vmotion and use separate VLAN, and if you...
View ArticleRe: workstation 8 unable to install vmware tools in ubuntu 12.04
are you sure.. your installation went.. fine.. if not you can use the steps.. to install the vmware tools in command prompt. also the steps are same
View ArticleRe: multi displays setup
However, ESXi booted until "cnic_register loaded successfully" and just hang there.This is only because you have given the onboard VGA display as the passthrough. You need to disable this device as the...
View ArticleRe: HP Flex10 and recommended vDS config for HA and failover?
Referring to your query xavierwalker wrote: We have two shared uplink sets, one per VC module: /servlet/JiveServlet/downloadImage/2-2177444-25730/sus1.pngInside VC, we have created two virtual connect...
View Articlevirtual game PC ?
Dear friends, I have question came to my mind if it's possible, I have very high end gaming PC and I do play on workstation so I can have all time backup of my virtual PC and also if I need to move it...
View ArticleRe: Partition Alignment
can you try the partition creation in command prompt... also refer more info in my blog http://pibytes.wordpress.com/2013/01/19/partition-alignment-in-vmware-vsphere-5- a-deepdrive-part-1/
View ArticleRe: keep disk as thin move VM to another datastore by powering off
Dear Andr'e, I tried this command but getting error DiskLib_Check() failed for the source disk, the system cannot find the file specified. I typed this command: vmkfstools...
View ArticleRe: keep disk as thin move VM to another datastore by powering off
vmkfstools -i/vmfs/volumes/EVAStorage2/PRTG_NM/PRTG_vmdk -d thin /vmfs/volumes/SAN-Fata-Storage/PRTG_NM/PRTG_NM.vmdkIf this is the exact command you used, then there are 2 typos in it. A missing space...
View ArticleRe: keep disk as thin move VM to another datastore by powering off
Ok I will add space after i, you mean it should be like: vmkfstools -i /vmfs/....................so on it is FC storage SAN eva4400 thanks,
View ArticleRe: VM shows BSOD after P2V
What type of virtual disk controller did you select in the conversion wizard? For Windows 2003 the "LSI Logic Parallel" controller is the default.Depending on the target virtual disk type it might be...
View ArticleRe: Network question for new Vsphere 5.1 Datacenter
Thanks @all for your help. I think I have enough information now. I will do the setup with vmware consultants, but I wanted some pre-info. Thanks again!
View ArticleRe: Migration to host x.x.x.x failed with error Already disconnected...
Hi, Can you please post the vmkernel/hostd messages when the vmotion failed.
View ArticleRe: Cannot validate SSRS Instance
I solved the problem on my own. Since login is disabled during VCM installation, different domain account should be used to install VCM.
View ArticleRe: esxi host unable to access other host's datastore vCenter.
Hi, Local disk of one ESXI host will not be able to access by other ESXI host. I alos use similar setup , Here is my setup in workstation. 1. Two ESXI host in VMware Workstation virtual machine 2. One...
View Articleautocad slow cursor movement in view 5
Hello ,all:I am facing problem in Autocad 2008 software. Cursor is moving slow in Autocad drawing areabut when i move cursor away from drawing area ,for example on toolbars ,desktop or any other...
View ArticleRe: Installing vCenter Server 5.1 on Windows Server 2012
Hi ElGarufo, I think the official support will be available starting from vSphere 6.The Server 2012 project I started has completed with the exception of vCenter Server. I will just wait untill it is...
View Article