Quantcast
Channel: VMware Communities: Message List
Viewing all 246286 articles
Browse latest View live

Re: Persona Management - Redirected Desktop Folder

$
0
0

Are the persona repository and folder redirection locations the same?    I haven't seen the issue and my first thought is that someone must have reset the permissions.   


Re: Server 2012 NIC

$
0
0

I run several Windows 2012 servers on the same host without this issue, using VMXNET3 driver.

Remove an adapter

$
0
0

Hi all,

 

is there a way to delete an adapter into vCOPS  5.6? I would like to reinstall the MSCOM Adapter.

 

Thx

 

Matrix

Re: Remove an adapter

PSOD - IBM blade server

$
0
0

I saw this PSOD during reboot on one of blade IBM server which worked fine for a long time.

Does anyone have an idea what could be causing this?

 

PSOD -1.JPG

Re: HTTP Status 404 - /dashboard.action

$
0
0

You are using the vApp or the Windows install of vC Ops?

Re: Enable EVC on a Running Cluster

$
0
0

If you go through the process of enabling EVC it will show you in the Compatibility View pane what mode is compatible with all your hosts.  Once EVC is enabled you'll need to power down the VMs, then when they power back up they are restricted to the CPU masks slected in EVC, then you can vMotion between hosts.

Re: Download PCoIP Display Protocol: Information and Scenario-Based Network Sizing Guide


Preauthentication issue on powershell AD module in VCO

$
0
0

We are trying to use the VCO powershell plugin to run simpla AD commands, for example

import-module ActiveDirectory

get-aduser username -server servername.domainname

 

From the powershell host, I can open up a powershell command and run these commands successfully.

 

However,  when trying to run this workflow inside vco, the error fails and says  that the host may not be available.  The error occurs on the get-aduser  command, the import-module ActiveDirectory command runs okay.

 

Our  VCO host is configured for HTTP, Kerberos authentication, we are using  the FQDN for hostname, and for the time being we are using a shared  session, although we have tried it with user session, and get the same  result.

 

A wireshark capture shows when trying to establish the Kerberos session, we are getting a KRB5KDC_ERR_PREAUTH_REQUIRED.

 

We  have the krb5.conf file in place, and have allow_weak_crypto set to  true.  Inside winrm, we have enabled Kerberos on client and service,  have added trusted hosts, and have verified that kerberos is working  with the winrm id -r:hostname.domainname -a:kerberos -u:username -p.

 

We  are running the latest powershell vco, and have the VCO 5.1 U1 just  released (but it was happening with older versions as well, i.e. we have  not been successful in getting this to ever work).

 

Any thoughts?

Re: Enable EVC on a Running Cluster

$
0
0

Welcome to the community!

 

First you need check this matriz of compatibility http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003212

 


Second i recommend enable hyperthreating because in general its considered best practices.

 

And to enable EVC you need power off all virtual machine, you cant enable evc with virtual machines running. ( http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.vcenterhost.doc%2FGUID-DE575FB9-24AE-4453-966B-5340B8147FC9.html )

 

 

considering that you´ve a vcenter in vm check out - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1013111

Re: Cannot connect the connection server to composer

$
0
0

Did you verify that you could ping the vCenter server from the Connection broker?   What about disabling the firewalls and verifying the account you specified for connectivity?

Re: Remove an adapter

$
0
0

In the custom UI under Environment > Configuration > Adapter Instances you should be able to remove an adapter instance there.

Re: Server 2012 NIC

$
0
0

Many thanks all.  We have, in the past 15 minutes, managed to get the darn thing working (after three and a half days of some serious head scratching and highly colourful language).

 

The box that is hosting the servers uses an HP NC375i Integrated Quad Port multifunction gigabit card, and, for one reason or another, two of those ports were plugged into our switch.  The management network was going out through one port, and the pool of servers was going out through the other. We've unplugged VMNIC1 and forced everything through VMNIC0...hey presto!  No idea why this works (especially as when we just moved everything onto a single nic and left the other port plugged in there was no issue).  It's not ideal, but at least it makes it usable now.

Re: use an existing license for temporarily storage vmotion some vms

getting RTO to Vms and ESX

$
0
0

Hi Team,

 

i have 9 ESX5.0 host in cluster. we have configured cluster for host and it is working fine for VMs.

we have distributed network to management and vmotion in 1 switch and other production VMs in other switch.

 

VMs and ESX mangement netwok is different.

 

Now a days i am getting issue for some ESX and VMs. it is giving request time out for some VMs as well esx. after some time it started working again properly.

 

 

please help me to troubleshoot this issue. issue is haapening intermediately.

 

please suggest how i can troubleshoot same.

 

 

Regards,

Deepak


Re: Adaptec cim arcconf esxi 5.1u1

$
0
0

arcconf getconfig 1 уже стал работать после установки драйверов от adaptec,  вот кусок

Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
   Controller Status                        : Optimal
   Channel description                      : SAS/SATA
   Controller Model                         : Adaptec 3805
   Controller Serial Number                 : 7C351105D6D
   Physical Slot                            : 5
   Temperature                              : 44 C/ 111 F (Normal)
   Installed memory                         : 256 MB
   Copyback                                 : Disabled
   Background consistency check             : Enabled
   Automatic Failover                       : Enabled
   Global task priority                     : High
   Stayawake period                         : Disabled
   Spinup limit internal drives             : 0
   Spinup limit external drives             : 0
   Defunct disk drive count                 : 0
   Logical devices/Failed/Degraded          : 2/0/0
   NCQ status                               : Enabled
   --------------------------------------------------------
   Controller Version Information
   --------------------------------------------------------
   BIOS                                     : 5.2-0 (17342)
   Firmware                                 : 5.2-0 (17342)
   Driver                                   : 1.1-7 (28700)
   Boot Flash                               : 5.2-0 (17342)
   --------------------------------------------------------

Да сейчас Adaptec RAID 5805 Firmware/BIOS Update Ver. 5.2.0 Build 18948 последняя

Буду обновлять.

Re: Configure Windows Server 2012 with Failover Clustering issue

$
0
0

I have Server 2012 running 2 node fail-over cluster with RDMs on ESXi 5.1 without issue, following the same guide you posted.

Re: Upgrade to vCenter 5.1 update 1 SSO failing

$
0
0

Been there tried that already.  Here is a snippet of the imstrace.log

 

 

2013-04-29 20:19:53,045, [main], (ManageSecretsCmd.java:470), trace.com.rsa.security.keymanager.tools.ManageSecretsCmd, ERROR, "was server name  I blanked this out xxxxxx.xxxxxxxxx.xxx,,,,Fatal error
com.rsa.ims.security.keymanager.sys.InvalidPasswordException: Invalid password, failed to decrypt system key
    Root cause: javax.crypto.BadPaddingException: Given final block not properly padded
at com.rsa.ims.security.lockbox.crypto.d.a(d.java:2)
at com.rsa.ims.security.lockbox.crypto.c.c(c.java:1)
at com.rsa.ims.security.lockbox.crypto.c.a(c.java:104)
at com.rsa.ims.security.lockbox.crypto.d.c(d.java:48)
at com.rsa.ims.security.lockbox.b.loadFields(b.java:245)
at com.rsa.security.keymanager.tools.ManageSecretsCmd.list(ManageSecretsCmd.java:604)
at com.rsa.security.keymanager.tools.ManageSecretsCmd.execute(ManageSecretsCmd.java:439)
at com.rsa.security.keymanager.tools.ManageSecretsCmd.main(ManageSecretsCmd.java:468)
Caused by: javax.crypto.BadPaddingException: Given final block not properly padded
at com.sun.crypto.provider.SunJCE_f.b(DashoA13*..)
at com.sun.crypto.provider.SunJCE_f.b(DashoA13*..)
at com.sun.crypto.provider.AESCipher.engineDoFinal(DashoA13*..)
at javax.crypto.Cipher.doFinal(DashoA13*..)
at com.rsa.ims.security.lockbox.crypto.b.b(b.java:13)
at com.rsa.ims.security.lockbox.crypto.d.a(d.java:36)

 

I have a question for my understanding.  I've installed SSO several times for my lab and for customers.  No where does it every ask to set a MASTER password unless it gets set the first time you assign a password for admin@system-domain.  If that is the case the password never changed.

Re: HTTP Status 404 - /dashboard.action

Re: Adaptec cim arcconf esxi 5.1u1

$
0
0

Arcconf ведь это вот этот vib?

 

vmware-esx-provider-arcconf.vib

Viewing all 246286 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>